Home|Sitemap|Contact us

Shenzhen Pard Technology Co., Ltd.

Shenzhen Puleide Technology Co., Ltd


PARD,design,develop,manufacture and supply our own products

Hot search:Thermal Imaging Scope

contact us

    General Enquiry:

    Technical Support:

    Customer Service:


Browsing History

current location:Home»News & Events»Industry information-Three things to keep in mind when using an infrared thermal imagingIndustry information

Three things to keep in mind when using an infrared thermal imaging

source:  release time:2018-01-08   Click volume:182

Thermal imaging can detect the location and operation rule of various heat sources in other devices by temperature, and predict its development trend. The thermal imaging with a word of mouth is often used for equipment condition maintenance because of its performance characteristics. Such high precision instruments need good maintenance and incorrect use will also cause damage and inaccuracy of thermal imaging and influence the use effect. So here are three things to keep in mind before and after use.

Three things to keep in mind when using a thermal imaging

1. Ensure the integrity of the parts when the instrument is used

It is necessary to check the complete components of the infrared thermal imaging before use. The thermal imaging will be affected by the lack of any spare parts. At the same time, it should be checked clearly, especially when the lens cover is covered, and the object should be placed in a professional collection tool.

2, More attention should be paid to the use of the instrument

When using the most professional thermal imaging, it can not make its lens facing the strong energy source or to the sun for a long time, otherwise it may damage its detector. It is better not to use outside in the rain, and the water will damage the instrument. In general its use environment temperature cannot too low. Try to use outdoors after sunset or on cloudy days. Try to use outdoors after sunset or on cloudy days, it has a more obvious environmental temperature difference, which makes the accuracy of the measured value minimal.

3. Instrument storage environment should also be paid attention to

The thermal imaging will have a special box for people to carry and keep in a dry environment. This is the rule that must be followed after use. The thermal imaging can not be discarded, only the matched storage box can give the equipment the full protection.
Thermal imaging as a major force in the detection of industrial activities, provides a good guarantee for the smooth operation of many industrial activities. Therefore, users should pay more attention when using high performance thermal imaging. With reference to the above three conditions, we can provide good protection for better industrial activities.

Popular tags: